Pro Carpet Trust

Sidwell
•
Building contractors
Your request goes to active partners nearby, not to this business.
Not affiliated with our platform
5.0

Claim it for free and start getting requests from customers in your area.

Claim profile for free

Similar pros near Sidwell

Other services in Port Elizabeth and surroundings

Recent requests

Kitchen and bathroom renovation

  • City (or suburb) where you need the service: Fourways, Sandton
  • What kind of property do you have?: Flat complex
  • What rooms do you want to renovate/remodel?: Kitchen, Bathroom(s), Bedrooms/Living room/Dining room
  • Approx. size of the renovation/remodel: Less than 100 sqm
  • Do you have all the necessary building plans?: No plans are required
  • Estimated project start: As soon as possible
  • Price estimate: R150,000

Kitchen renovation to remove current cabinets and install new cabinets and counter. Install footing tv stand with book shelf. Instal small vanity table and shelf in bedroom. Renovate bathroom by removing bath tub and installing shower and replacing bathroom cabinet. Images attached are the expected results.

Construcción casa 120 sqm

  • City (or suburb) where you need the service: St Helena Bay
  • What type of property do you want to build?: House/Townhouse
  • Approx. size of the new build: 100–300 sqm
  • Do you have all the necessary building plans?: No plans are required
  • Estimated project start: As soon as possible
  • Price estimate: R1,800,000

I needs a 3 bedroom U shape house to capture the view , with a larger living space and smaller bedroom space, double garage with a pergola in front captivating the view with 2 sliding doors that have windows with the main door in the middle and a gable window above the front door. Tight budget with sqm

Excavation for residential houses

  • City (or suburb) where you need the service: Ballito, Dolphin Coast
  • What kind of property do you have?: House/Townhouse
  • What do you want to build?: Other
  • Estimated project start: As soon as possible
  • Price estimate: R95,000

We dug trenches for 3 times 3 and 4 bedroom houses. When time to backfill we usually fill the soil to make thr ground level for next steps to concrete pour. This time they wanted us to dig mm deeper house layout and mm deeper in double garages. We were digging and loading straight to wheelbarrows for al 3 houses. We usually charge labour rates but this time the client wants the quote based on the volume of soil

Install sliding door in townhouse

  • City (or suburb) where you need the service: Randpark Ridge, Randburg
  • What kind of property do you have?: House/Townhouse
  • What rooms do you want to renovate/remodel?: Bedrooms/Living room/Dining room
  • Approx. size of the renovation/remodel: Less than 100 sqm
  • Do you have all the necessary building plans?: No plans are required
  • Estimated project start: I'm flexible
  • Price estimate: R15,000

I would like to install a sliding door in one of the bedrooms of my townhouse that leads into the yard. The wall is a boundary wall so I think it is double brick. I have already purchased the sliding door. It's dimensions are 1.8m x 2.05m There is an electrical plug against the wall so that needs to be moved in accordance with electrical compliance. I have attached a picture of the room. It is the wall that is on the right infrokt of the cupboards. I would like to understand what you gaurentees are like and if you will provide the relevant electrical compliance certificate for moving the plug

Kitchen cabinetry assembly and installation

  • City (or suburb) where you need the service: Cape Town
  • What kind of property do you have?: House/Townhouse
  • What rooms do you want to renovate/remodel?: Kitchen
  • Approx. size of the renovation/remodel: Less than 100 sqm
  • Do you have all the necessary building plans?: No plans are required
  • Estimated project start: As soon as possible
  • Price estimate: R25,000

Full Kitchen Cabinet Assembly & Installation (Labour Only)Location: Job Type: Kitchen Cabinetry – Joinery, Assembly & Fitment (Labour Only)Materials Supplied: All cut-and-edged 16mm boards (PG Bison MelaWood), 3mm backing boards, hinges, soft-close undermount runners, gas struts, pull-out wire mechanisms, handles, and fasteners/fixings will be supplied on-site.Requirement: Experienced cabinet maker/installer to assemble flat-pack cut components into square carcasses and professionally fit, level, and secure all units according to detailed technical drawings.Detailed Work Scope & Module Breakdown1. Feature Wall Cabinetry System (Straight Run – 2,mm Wide × 2,mm High)Module A (Pantry Unit): $\text{mm (W)} \times 2,\text{mm (H)} \times \text{mm (D)}$ — Full-height carcass assembly with 5 internal shelves and 4-hinge door fitment.Module B (Spice Pull-Out Unit): $\text{mm (W)} \times 2,\text{mm (H)} \times \text{mm (D)}$ — Carcass assembly and installation of $\text{mm}$ floor-mounted wire pull-out mechanism with full-height front panel.Module C (Window Surrounding Unit):Base Drawer Unit: $\text{mm (W)} \times \text{mm (H)} \times \text{mm (D)}$ — Assembly of base carcass + 3 custom drawer boxes on $\text{mm}$ undermount soft-close runners with drawer fronts.Overhead Cabinet: $\text{mm (W)} \times \text{mm (H)} \times \text{mm (D)}$ — 2-door wall-hung box above window reveal.Module D (Fridge Overhead Unit): $\text{mm (W)} \times \text{mm (H)} \times \text{mm (D)}$ — Top box fitted above fridge recess ($1,\text{mm}$ to $2,\text{mm}$ AFF) with lift-up flap door on gas struts ($80\text{N}\text{--}\text{N}$).Module E (Broom Cupboard): $\text{mm (W)} \times 2,\text{mm (H)} \times \text{mm (D)}$ — Full-height single door unit with internal high shelf.Finishing: Fitting of continuous $\text{mm}$ bottom plinth/kickplate and top bulkhead scribing/filler strip ($\text{mm}$ down to $\sim80\text{mm}$).2. L-Shaped Kitchen Run (Left Wall: 2,mm | Back Wall: 2,mm)Left Wall Units ($2,\text{mm}$ run):Pantry / Oven & Microwave Tower: $\text{mm (W)}$ appliance tower housing built-in eye-level oven, microwave aperture, and base/top storage.Prep Drawer Base Unit: $\text{mm (W)}$ 3-drawer base unit.Extractor / Upper Wall Cabinets: $\text{mm (W)}$ upper wall unit configuration incorporating an under-cabinet extractor housing ($\text{mm}$ hob clearance).Corner & Back Wall Units ($2,\text{mm}$ run):Corner Base & Upper Units: $\text{mm} \times \text{mm}$ corner carcass integration.Sink Base Unit: $\text{mm (W)}$ double-door sink unit (cutouts for plumbing).Dishwasher Void: $\text{mm (W)}$ under-counter appliance opening.End Base Drawer Unit: $\text{mm (W)}$ 3-drawer storage unit.Upper Wall Units: $1,\text{mm (W)}$ wall cupboards + $\text{mm (W)} \times \text{mm (H)}$ bridge cabinet above the back window.Plinths & Concealed LED Prep: Installation of bottom kickboards/plinths and fitting under-cabinet pelmet channels for LED strip lighting.Installer Requirements & DeliverablesAssemble all carcasses using $7 \times 50\text{mm}$ Confirmat/wood screws (pre-drilled pilot holes to prevent splitting).Fix $3\text{mm}$ white masonite backing boards square using screws/nails.Accurately mount all hinges ($^\circ$ soft-close), gas struts, and undermount soft-close drawer runners.Level, align, secure carcasses to brick walls, and align all door reveals/gaps evenly.Neatly route cutouts for services (water inlets/waste under sink, electrical plugs, and extractor ducting where required).Quote Request DetailsPlease provide:Estimated Total Labour Cost (fixed-rate installation).Estimated Duration / Number of Days on-site.Earliest Available Start Date.References or Photos of recent similar cabinetry installations.

Facade remedial work on complex

  • City (or suburb) where you need the service: De Kelders
  • What kind of property do you have?: Flat complex
  • What do you want to build?: Other
  • Estimated project start: As soon as possible
  • Price estimate: R75,000

Good day, I am the caretaker of the complex, and we would like to obtain a quotation for remedial work to the front facade of one of the buildings. There is a concrete strip along the front of the building that has deteriorated and is starting to come away from the facade. We would like the strip to be safely removed and the affected area properly repaired. Please provide a quotation covering the following: * Removal and disposal of the deteriorating concrete strip. * Preparation and repair of the affected facade. * Sealing of the repaired area to prevent water ingress. * Repainting of the affected section, or the complete front facade if necessary to achieve a uniform finish. Please inspect the site and advise on the most suitable method of repair, as well as any additional work you recommend to prevent the problem from recurring. Kind regards,

Install cottage pane window

  • City (or suburb) where you need the service: Hillcrest
  • What kind of property do you have?: House/Townhouse
  • What do you want to build?: Other
  • Estimated project start: As soon as possible
  • Price estimate: R15,000

Install a mm x mm meranti, non-opening cottage pane window, with standard 4mm glazing, plaster the reveal with a mm plastered window surrond on the outside to match existing windows, window frame to be primed and painted white with 2 coats of nin-drip enamel, inside of wall around window to be smooth plastered flush to existing plaster or wall skimmed around window to a smooth finish. Window will be located approximately 3m above ground level, requiring a scaffold for installation. Two pictures are attached. One showing the installation location and the other is an AI generated conceptual depiction pf the desired outcome.

Replace and seal window

  • City (or suburb) where you need the service: Malmesbury
  • What kind of property do you have?: House/Townhouse
  • What rooms do you want to renovate/remodel?: Bedrooms/Living room/Dining room
  • Approx. size of the renovation/remodel: Less than 100 sqm
  • Do you have all the necessary building plans?: No plans are required
  • Estimated project start: I'm flexible
  • Price estimate: R25,000

I want to replace an existing Swartland cape Dutch window 1.2m x 1.5m with a large Swartland cape Dutch ready with glass window 2.5m x1.5m . A lintel will have to be built in first with support and then the window can be built in, but sealed with silicone all around. Then the plaster work and painting can be done. The hole in which thevwindow fits must be cut out in a neat rectangular shape with an angle grinder so that only the ewe has to be plastered and painted

Garage conversion to bedroom

  • City (or suburb) where you need the service: Cape Town
  • What kind of property do you have?: House/Townhouse
  • What rooms do you want to renovate/remodel?: Kitchen, Bathroom(s), Bedrooms/Living room/Dining room, Garage
  • Approx. size of the renovation/remodel: 100–300 sqm
  • Do you have all the necessary building plans?: Yes, I have all the necessary plans
  • Estimated project start: As soon as possible
  • Price estimate: R350,000

Converting an old garage to a bedroom with a ensuite and bathroom ,putting a new passge anolng the existing 2 bedrooms changing all windows putting a new garage putting 2 new bay windows cladded with timber outside removing existing paving 80 square metres and laying new paving building a new braai area

Electrical installations and adjustments

  • City (or suburb) where you need the service: Kommetjie, Cape Town
  • What kind of property do you have?: House/Townhouse
  • What do you want to build?: Other
  • Estimated project start: As soon as possible
  • Price estimate: R15,000

Electrical * Supply of all material needed, plugs, ush boxes, cables, conduit pipe, garden store room light, etc * Remove old lighting in garden store room, install new tting and bulb, tubing and installation of new plug point in garden store room * Chase the wall, Tubing, install plug point in o ce, remove 2 lights ttings and replace with others from another bedroom, * Replace 1 bulb, remove 1 light from onother wall and install on light point. * Remove fan from upstairs, tubing and installation in downstairs bedroom, install 2 lights points on wall * Neaten up intercom cable glue it above the doo